This exciting new addition to the Euro product range provides a high quality display and control point for alarm systems in prestigious locations.
The design features a high quality sound output, proximity detection to ‘wake-up’ the display, an IR port for downloading bespoke graphics, future provision for control of media devices such as music and TV, home automation and so on. At the heart of the design is a large full colour TFT touch screen for simple operation and programming of system.
External proximity readers are fully sealed to IP65 for exterior use.
Green and Red LEDs indicate status of system when valid tag/card is presented.
Wires direct to the Euro RS-485 BUS.
Dimensions: 85 x 85 x 20 mm Note: The External Tag reader can only be used to unset one designated area, or all areas of the system.
This reader cannot be used with the Euro-10, Euro-12 or the Euro-ONE 28 when in iD mode.
Action
If currently unset
If Currently Set
Present Tag to Reader
Green LED lights
Red LED lights
Present Tag to Reader again
Green & Red LEDs light. Once set the green LED will go out, and the Red LED remains lit for 25 secs.
Red LED goes out and the green LED lights for 25 secs.